Drager polytron pulsar 2 manual

The Dräger Polytron Pulsar 2 detects hazardous releases of flammable hydrocarbons using the open path technique. The Dräger Polytron Pulsar 2 it adds new and unique features which overcome common problems and annoyances in practical installations. A Transmitter sends a beam of infrared light through the air to a Receiver.  · 1 The POLYTRON PULSAR detector comes in two parts a Transmitter and a Receiver. These are supplied ready assembled to their back plates along with their associated Terminal Boxes. 2 An Optical Attenuator for use on beam paths between 4 and 16 metres. 3 A copy of this manual and a quick start guide are also supplied with the detector. The factory calibration of the Dräger Polytron Pulsar 2 makes manual setting and test gas superfluous. The Dräger Polytron® Pulsar 2 Gas Detector is designed so that no fault remains undetected. During normal operation, the output signal is between 4 to 20 mA, depending on the measured gas concentration. The receiver logs records and details.

The Dräger Polytron Pulsar 2 is the latest infrared technology in open path gas detection. Equipped with all the same functions as the standard Dräger Pulsar, Pulsar 2 is fitted with an ABS moulded cover and is supplied with either a junction box or certified connector to provide complete flexibility during installation. For your safety 1 For your safety 2 Intended use General safety statements Dräger Polytron Pulsar open path gas detector Strictly follow this Technical Manual Any use of the device requires full understanding and strict For stationary, continuous monitoring of hydrocarbon gases or observation of this Technical Manual and the Instructions for vapours that may present an explosion hazard. The factory calibration of the Polytron Pulsar makes manual setting and test gas superfluous. System stability The detector is designed so that no fault remains undetected. During normal operation, the output signal is between 4 to 20 mA, depending on the measured gas concentration. A signal of < 1 mA represents a fault due to a constant beam.

Dräger Polytron Pulsar 5 4 Understanding the system Introduction The Dräger Polytron Pulsar detects hazardous releases of flammable hydrocarbons with th e advantages of the open path technique. The Dräger PolytronPulsar adds new and unique features which overcome common problems and annoyances in practical installations. Dräger Polytron Pulsar Alignment Kit, ATEX/CSA (Ethylene Dräger Polytron Pulsar only) 23 50 Gas test sheets (Ethylene) 23 50 Dräger Polytron Pulsar Part number Dräger Polytron Pulsar ATEX m (TX only) 23 50 Dräger Polytron Pulsar ATEX m (TX only) 23 50 Dräger Polytron Pulsar ATEX m (TX only) 23 50 The Dräger Polytron Pulsar 2 is the latest infrared technology in open path gas detection. Equipped with all the same functions as the standard Dräger Pulsar, Pulsar 2 is fitted with an ABS moulded cover and is supplied with either a junction box or certified connector to provide complete flexibility during installation.